History

The earliest known shoes date from about 8000 to 7000 BCE and were found in Oregon, USA in 1938.^[1] However, the materials used for making shoes (typically tanned leather) do not normally last for thousands of years, so shoes were probably in use long before this. Physical anthropologist Erik Trinkaus believes he has found evidence that the use of shoes began in the period between about 40,000 and 26,000 years ago, based on the fact that the thickness of the bones of the toes (other than the big toe) decreased during this period, on the premise that going barefoot results in greater bone growth before this period.[1]

The earliest designs were simple affairs, often mere "foot bags" of leather to protect the feet from rocks, debris, and cold. Since a shoe uses more leather than a sandal, their use was more common amongst people in cold climates. By the Middle Ages, turn-shoes had been developed with toggled flaps or drawstrings to tighten the leather around the foot for a better fit. As Europe gained in wealth and power, fancy shoes became status symbols. Toes became long and pointed, often to ridiculous proportions. Artisans created unique footwear for rich patrons, and new styles developed. Eventually the modern shoe, with a sewn-on sole, was devised. Since the 17th century, most leather shoes have used a sewn-on sole. This remains the standard for finer-quality dress shoes today.

Since the mid-20th Century, advances in rubber, plastics, synthetic cloth, and industrial adhesives have allowed manufacturers to create shoes that stray considerably from traditional crafting techniques. Leather, which had been the primary material in earlier styles, has remained standard in expensive dress shoes, but athletic shoes often have little or no real leather. Soles, which were once laboriously stitched on, are more often glued today.

Dance shoes

* Pointe shoes. Designed for ballet dancing. These have a toe box that is stiffened with glue and a hardened sole so the dancer can stand on the tips of their toes. They are secured by elastic straps and ribbons that are tied to the dancer's ankles.
* Ballet shoes Heel-less slippers made of canvas or leather, with either continuous or two-part sole (i.e., split-sole). The sole is typically made of leather, with thicker material under the ball and heel of the foot, and thinner and thus more flexible material under the arch so that the foot can be pointed to its utmost. Ballet slippers are usually secured by elastics that cross over the top of the foot. They are most commonly pink, white, black, or pale tan, although they may be made in specialty colours such as red or blue.
* Jazz shoes. These typically have a two-part, rubberized sole (i.e., split-sole) to provide both flexibility and traction, and a low (one inch or shorter) heel. They are secured to the foot by laces or elastic inserts.
* Tango/flamenco dance shoes.
* Ballroom shoes. They fall into two categories for the two genres of dances as defined by the IDSF (International DanceSport Federation): Ballroom and Latin American. Both are characterised by suede soles. Mens' Ballroom shoes are typically lace-ups with 1-inch heels and patent leather uppers. Ladies' Ballroom shoes are typically court shoes with low 2-inch heels, usually made of fabric so that they can be finished with a greater variety of colours to match the dancer's dress. The low Ballroom heel distributes the dancer's weight across the foot while Latin American shoes have higher heels designed to throw the dancer's weight on to the toes and the soles are more flexible. Men's Latin shoes typically have 1.5-inch to 2-inch shaped heels while Ladies' Latin shoes have 2,5-inch to 3-inch heels, open-toed and strapped.
* Dance sneakers. Also known as dansneakers, these are a combination of a sneaker and a dance shoe, with a reinforced rubber toe.
* Character shoes. Shoes with a one to three inch heel, which are usually made of leather, and often have one or more straps across the instep to secure the foot during dance. They may come in soft-soled (suede) or hard-soled varieties. They may be converted to tap shoes by attaching taps.
* Foot thongs. Variously called called Foot Paws and FootUndeez, depending on the manufacturer, these are slip-on, partial foot covers that protect the ball of a dancer's foot from skin abrasions while executing turns. From a distance, flesh colored foot thongs give a dancer the appearance of having bare feet.

A climbing shoe or kletterschuh is a piece of foot wear designed for rock climbing. Typical climbing shoes have a close fit, little if any padding, and a smooth, sticky rubber sole with an extended rubber rand. Most climbing shoes are very specialized, and are unsuited to walking and hiking, so climbers carry them to the base of the rock.

Athletic shoes

Men's and women's athletic shoes and special function shoes often have less difference between the sexes than in dress shoes. In many cases these shoes can be worn by either sex. Emphasis tends to be more on function than style.

• Sneakers/trainers (also called gym shoes or tennis shoes): general purpose athletic shoes; made out of rubber, cloth, and/or plastic to be lightweight, flexible, and have good traction. Special varieties are available for basketball or tennis.
• Running shoes: very similar to above, with additional emphasis on cushioning.
• Track shoes: lightweight; often with plastic or metal cleats
• Cleat (shoe): a type of shoe featuring molded or removable studs. Usually worn while playing sports such as rugby, football, American football, or baseball.
  

  A shoe for the right foot.
• Golf shoes: with "spikes" for better grip in grass and wet ground. Originally the spikes or "cleats" were made of metal but replaceable "soft spikes" made of synthetic plastic-like materials with prongs distributed radially around the edge of each spike are much more common today (and are required on many golf courses since they cause less damage to the greens).
• Bowling shoes: intermediate style between ordinary dress shoes and athletic shoes. They have harder rubber soles/heels so as not to damage bowling alley floors. They are often rented or loaned at bowling alleys.
• Climbing shoes: a shoe designed for rock climbing. They typically have a close fit, little if any padding, and a smooth sticky rubber sole with an extended rubber rand.
• Hiking shoes or boots: usually have a high somewhat stiff upper with many lace eyelets, to provide ankle support on uneven terrain, with extra large traction on the sole.
• Walking shoes: have a more flexible sole than the running shoe, lighter in weight than the hiking boot, may have air holes, may not be water proof.
• Skating shoes: typically called skates. They have various attachments for skating on the bottom of the shoe portion.
  • Ice skates
  • Roller skates
  • Inline skates
• Ski boot: a large, thick plastic boot specially designed for attachment to the ski.
• Skateboarding shoes have flat soles for a better grip on a skateboard. They are very wide and have extra layers of padding to protect the skateboarders feet.
• Cycling shoes are equipped with a metal or plastic cleat to interface with clipless pedals, as well as a stiff sole to maximize power transfer and support the foot.
• Snowshoes are special shoes for walking in thick snow. In temperate climates, snowshoes are used for mostly recreational purposes in winter.
• Wrestling shoes are light, flexible shoes that mimic bare feet while providing additional traction and protection.